Author: Ginger_aleSubject: ALL Mk2 dashcam, reversing camera info
Posted: 08 Apr 2018 at 4:47pm
Well that was a fuss over nothing. I went from the rear window and tucked it in the upper trim along the left hand side. When I got to the b pillar with the curtain airbags, I ran down the rear door rubber, behind the seat belt then up the front door rubber then carried on along the roof trim / door rubber. Then tucked into the top of the a pillar trim and finally across the windscreen. The only bit you can see is the bit at the bottom of the b pillar but who notices that unless you look?
The problem I now have is where to screw the ground for the permanent power feed. I am going to use either an ignition live or interior relay feed from the front fuse box.