Author: mimietti
Subject: AWD Malfunction / Haldex servicing info
Posted: 06 Apr 2018 at 1:28pm
Subject: AWD Malfunction / Haldex servicing info
Posted: 06 Apr 2018 at 1:28pm
 tarmo120 wrote:
There should be 2 holes between the bolt holes in the Haldex side of coupling flange. You can use a pin and hammer to take it off. As far as I remember, the holes were not threaded. Mine was rusty also. You can try to pull the driveshaft to the front, but that means you still need to disconnect the front end of driveshaft. |
Yes, noted those holes and mechanic used small pneumatic impact hammer through those holes when tried to release propshaft (front end was disconnected). It did not work. Two shops have tried to release it without success. So it is damn well rusted...